Change macbook pro 2011 hard drive to ssd

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD HOW TO#
#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD MAC OS#
#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD INSTALL#
#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD PRO#
#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD DOWNLOAD#

Connect the SATA and power cable to the new SSD, and carefully place it where the old hard drive was located.Put those four screws on the new SSD and stick the plastic pull tab on it.Once the hard drive is removed, itвЂ™s a good idea to use some compressed air to dust the internals. Unplug the SATA and power cable from the hard drive, then remove the four screws in the sides of the hard drive with the Torx T6 screwdriver.Remove the black arm, then use the pull tab to carefully lift out the hard drive.Take off the bottom cover and use the Torx T6 screwdriver to loosenВ the two black screws in the blackВ arm/hinge that holdsВ down the hard drive.I set them down in the same pattern they are installed in the MacBook. Keep track of where they go because threeВ of them are longer than the others. Use the Phillips #00 screwdriver to remove the 10 screws on the bottom of the MacBook.DonвЂ™t just put it to sleep it must be shut down. I used createinstallmedia and a 16GB USB flash drive. Create a bootable USB installation drive.I used an external USB drive and Time Machine to create a backup. Backup any files that you want to keep from the old hard drive.These are the steps I followed (make sure you avoid static discharge when handling the computer internals): I would like to emphasize that you should get a Phillips #00 screwdriver and a Torx T6 screwdriver if you donвЂ™t already have them. I also picked up a Crucial 2x4GB DDR3 1066 Mac memory kit.ДЇor the installation process, there are plenty of blogs and tutorials so I wonвЂ™t go into fullВ details here.

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD PRO#

After browsing a few discussions on AppleвЂ™s support site and reading some reviews, I ordered a Crucial M500 240GB SSD because others reported good compatibility with the specific nVidia chipset (MCP79) in this 2009 MacBook Pro 13вЂі. Knowing that others had success with SSD and RAM upgrades in this MacBook model, I decided to pull the trigger on new hardware. I decided against that because even the best-case scenario would still be slow compared to the SSD speeds IвЂ™m used to on my personal desktop and my company MacBook with an SSD.

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD INSTALL#

The only вЂњfreeвЂќ option that I really had left was to backup the data, reformat the hard drive, and install a fresh copy of OS X. Nothing seemed to make a difference, and after an agonizing afternoon slowly upgrading to OS X Mountain Lion, I decided to get serious about fixing the problem. This was bad even for the hardware it had, so I tried a few different solutions, including upgrading to OS X Lion, fixing disk permissions, and general hard drive cleanup (defrag, deleting applications and files that were no longer needed, etc.). From a cold boot, it took about 4 minutes to load the OS and stop thrashing the hard drive so you could open a browser or iTunes. When I first used this laptop in 2013 (four years after it was manufactured) it was running OS X Snow Leopard. A few searches online uncovered others who had similar setups and successfully upgraded them to modern performance standards with an SSD and additional RAM.

While it probably worked great when it was new, five years later it had become painfully slow (#firstworldproblems) with its 2GB of RAM and 160GB HDD. Install your old hard drive in your usb enclosure and use it as a back up drive.My fianc Г© has a 13вЂі MacBook Pro from 2009. restart your macbook and you should have a startup time of 14 sec.

If you find that your boot time in your new ssd is too slow - go to system preferences - startup disk and select your ssd as your startup drive. Once the clone is done - install your ssd in your macbook - turn it on and your back in business. Source drive (your old hard drive) destination drive (your new ssd drive)Д¬lick on clone - you might get a pop up message saying that a recovery partition wasn't created - create one using carbon copy and proceed with the clone.

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD MAC OS#

Open disk utility - format/erase your ssd to mac os extended journaledД¬lose disk utility and open carbon copy and proceed to clone your drive. Install your ssd in your external enclosure.

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD DOWNLOAD#

Second - download carbon copy - free to download.ДЄssuming you've installed and downloaded carbon copy and have a usb external enclosure.

#CHANGE MACBOOK PRO 2011 HARD DRIVE TO SSD HOW TO#

When you decide to go SSD.Here are the step by step on how to do a data transfer.ДЇirst - make sure you have a usb external enclosure or a usb data cable.

Change macbook pro 2011 hard drive to ssd